iconcharts
0

CPU Benchmarks

Over 1,000,000 CPUs benchmarked

Intel Celeron N4000C @ 1.10GHz vs AMD R-272F APU

The values for the CPUs below are determined from thousands of PerformanceTest benchmark results and are updated daily.

  • The first section will show basic information for each CPU selected.
  • The additional graphs shows the CPU Mark and Single Thread values of each CPU selected.
  • An accompany graph, if price data is available, will shows the value for money, in terms of the CPU Mark/Thread Rating per dollar.
  • The last section will show approximate yearly running costs for the CPUs.
×Intel Celeron N4000C @ 1.10GHz×AMD R-272F APU+ ADD
PriceSearch OnlineSearch Online
Socket TypeFCBGA1090FS1
CPU ClassLaptopDesktop, Laptop
Clockspeed1.1 GHz2.7 GHz
Turbo SpeedUp to 2.6 GHzUp to 3.2 GHz
# of Physical Cores2 (Threads: 2)2 (in 2 physical modules)
CacheL1: 1,792KB, L2: 16.0MB, L3: 0MBL1: 160KB, L2: 2.0MB,
Max TDP6W35W
Yearly Running Cost$1.10$6.39
OtherIntel UHD Graphics 600
First Seen on ChartQ4 2019Q4 2019
# of Samples101
Single Thread Rating(% diff. to max in group)979(-9.9%)1087(0.0%)
CPU Mark(% diff. to max in group)1379(0.0%)1215(-11.9%)

CPU Mark Rating
As of 29th of November 2022 - Higher results represent better performance
Intel Celeron N4000C @ 1.10GHz
1,379
AMD R-272F APU
1,215
CPU Single Thread Rating
As of 29th of November 2022 - Higher results represent better performance
Intel Celeron N4000C @ 1.10GHz
979
AMD R-272F APU
1,087

Estimated Energy Usage Cost
Estimated Energy Adjustable Values
Average hours of use per dayAverage CPU Utilization (0-100%)1Power cost, $ per kWh2
1Average user usage is typically low and can vary from task to task. An estimate load 25% is nominal.
2Typical power costs vary around the world. Check your last power bill for details. Values of $0.15 to $0.45 per kWh are typical.
Intel Celeron N4000C @ 1.10GHzAMD R-272F APU
Max TDP6W35W
Power consumption per day (kWh)NANA
Running cost per dayNANA
Power consumption per year (kWh)NANA
Running cost per yearNANA
Shown CPU power usage is based on linear interpolation of Max TDP (i.e. max load). Actual CPU power profile may vary.