iconcharts
0

CPU Benchmarks

Over 1,000,000 CPUs benchmarked

Intel Xeon E5-2418L @ 2.00GHz vs AMD Opteron 6128 HE

The values for the CPUs below are determined from thousands of PerformanceTest benchmark results and are updated daily.

  • The first section will show basic information for each CPU selected.
  • The additional graphs shows the CPU Mark and Single Thread values of each CPU selected.
  • An accompany graph, if price data is available, will shows the value for money, in terms of the CPU Mark/Thread Rating per dollar.
  • The last section will show approximate yearly running costs for the CPUs.
×Intel Xeon E5-2418L @ 2.00GHz×AMD Opteron 6128 HE+ ADD
PriceSearch OnlineSearch Online
Socket TypeLGA 1356Socket G34
CPU ClassServerServer
Clockspeed2.0 GHz2.0 GHz
Turbo SpeedUp to 2.1 GHzNot Supported
# of Physical Cores4 (Threads: 8)8 (Threads: 8)
CacheL1: 512KB, L2: 2.0MB, L3: 10MBL1: 1,024KB, L2: 4.0MB, L3: 10MB
Max TDP50W85W
Yearly Running Cost$9.13$15.51
Other
First Seen on ChartQ1 2016Q2 2015
# of Samples13
Single Thread Rating(% diff. to max in group)977(0.0%)823(-15.8%)
CPU Mark(% diff. to max in group)3518(0.0%)2932(-16.7%)

CPU Mark Rating
As of 28th of November 2022 - Higher results represent better performance
Intel Xeon E5-2418L @ 2.00GHz
3,518
AMD Opteron 6128 HE
2,932
CPU Single Thread Rating
As of 28th of November 2022 - Higher results represent better performance
Intel Xeon E5-2418L @ 2.00GHz
977
AMD Opteron 6128 HE
823

Estimated Energy Usage Cost
Estimated Energy Adjustable Values
Average hours of use per dayAverage CPU Utilization (0-100%)1Power cost, $ per kWh2
1Average user usage is typically low and can vary from task to task. An estimate load 25% is nominal.
2Typical power costs vary around the world. Check your last power bill for details. Values of $0.15 to $0.45 per kWh are typical.
Intel Xeon E5-2418L @ 2.00GHzAMD Opteron 6128 HE
Max TDP50W85W
Power consumption per day (kWh)NANA
Running cost per dayNANA
Power consumption per year (kWh)NANA
Running cost per yearNANA
Shown CPU power usage is based on linear interpolation of Max TDP (i.e. max load). Actual CPU power profile may vary.